otp.Source.ts_subtract#
- Source.ts_subtract(other, /, input_field1_name=None, input_field2_name=None, *, output_field_name='VALUE', keep_zero_duration_ticks=False, bucket_interval=0, bucket_units=None, bucket_time='end', bucket_end_condition=None, boundary_tick_bucket='new', running=False, group_by=None, groups_to_display='all', end_condition_per_group=False)#
Computes the difference of the latest values of some attribute between two input time series.
- Parameters:
self (
Source) – The source to subtract from.other (
Source) – The source which is subtracted.input_field1_name (str) – The name of the input field from the first source. Default is ‘PRICE’.
input_field2_name (str) – The name of the input field from the second source. Default is ‘PRICE’.
output_field_name (str) – The name of the output field with the resulting value. Default is ‘VALUE’.
keep_zero_duration_ticks (bool) – When set to False (default), output ticks that last 0 time are discarded from the output.
bucket_interval (int or float or
OperationorOnetickParameterorsymbol parameteror datetime offset object, default=0) –Determines the length of each bucket (units depends on
bucket_units).If
Operationof bool type is passed, acts asbucket_end_condition.Bucket interval can also be set as a float value if
bucket_unitsis set to seconds. Note that values less than 0.001 (1 millisecond) are not supported.Bucket interval can be set via some of the datetime offset objects:
otp.Milli,otp.Second,otp.Minute,otp.Hour,otp.Day,otp.Month. In this case you could omit settingbucket_unitsparameter.Bucket interval can also be set with integer
OnetickParameterorsymbol parameter.bucket_units (Optional[Literal['seconds', 'ticks', 'days', 'months', 'flexible']], default=None) –
Set bucket interval units.
By default, if
bucket_unitsandbucket_end_conditionnot specified, set to seconds. Ifbucket_end_conditionspecified, thenbucket_unitsset to flexible.If set to flexible then
bucket_end_conditionmust be set.Note that seconds bucket unit doesn’t take into account daylight-saving time of the timezone, so you may not get expected results when using, for example, 24 * 60 * 60 seconds as bucket interval. In such case use days bucket unit instead. See example in
onetick.py.agg.sum().bucket_time (Literal['start', 'end'], default=end) –
Control output timestamp.
start
the timestamp assigned to the bucket is the start time of the bucket.
end
the timestamp assigned to the bucket is the end time of the bucket.
bucket_end_condition (condition, default=None) –
An expression that is evaluated on every tick. If it evaluates to “True”, then a new bucket is created. This parameter is only used if
bucket_unitsis set to “flexible”.Also can be set via
bucket_intervalparameter by passingOperationobject.boundary_tick_bucket (Literal['new', 'previous'], default=new) –
Controls boundary tick ownership.
previous
A tick on which
bucket_end_conditionevaluates to “true” belongs to the bucket being closed.new
tick belongs to the new bucket.
This parameter is only used if
bucket_unitsis set to “flexible”running (bool, default=False) –
See Aggregation buckets guide to see examples of how this parameter works.
Specifies if the aggregation will be calculated as a sliding window.
runningandbucket_intervalparameters determines when new buckets are created.running= Trueaggregation will be calculated in a sliding window.
bucket_interval= N (N > 0)Window size will be N. Output tick will be generated when tick “enter” window (arrival event) and when “exit” window (exit event)
bucket_interval= 0Left boundary of window will be set to query start time. For each tick aggregation will be calculated in the interval [start_time; tick_t] from query start time to the tick’s timestamp (inclusive).
running= False (default)buckets partition the [query start time, query end time) interval into non-overlapping intervals of size
bucket_interval(with the last interval possibly of a smaller size). Ifbucket_intervalis set to 0 a single bucket for the entire interval is created.Note that in non-running mode OneTick unconditionally divides the whole time interval into specified number of buckets. It means that you will always get this specified number of ticks in the result, even if you have less ticks in the input data.
Default: False
group_by (list, str or expression, default=None) – When specified, each bucket is broken further into additional sub-buckets based on specified field values. If
Operationis used then GROUP_{i} column is added. Where i is index in group_by list. For example, if Operation is the only element ingroup_bylist then GROUP_0 field will be added.groups_to_display (Literal['all', 'previous'], default=all) – Specifies for which sub-buckets (groups) ticks should be shown for each bucket interval. By default all groups are shown at the end of each bucket interval. If this parameter is set to event_in_last_bucket, only the groups that received at least one tick within a given bucket interval are shown.
end_condition_per_group (bool, default=False) –
Controls application of
bucket_end_conditionin groups.end_condition_per_group= Truebucket_end_conditionis applied only to the group defined bygroup_byend_condition_per_group= Falsebucket_end_conditionapplied across all groups
This parameter is only used if
bucket_unitsis set to “flexible”.When set to True, applies to all bucketing conditions. Useful, for example, if you need to specify
group_by, and you want to group items first, and create buckets after that.
Examples
Get the difference between hourly latest PRICEs from two sources:
>>> msft = otp.DataSource('US_COMP_SAMPLE', tick_type='TRD', symbols='MSFT') >>> aapl = otp.DataSource('US_COMP_SAMPLE', tick_type='TRD', symbols='AAPL') >>> data = msft.ts_subtract(aapl, bucket_interval=otp.Hour(1)) >>> otp.run(data, start=otp.dt(2024, 2, 1, 9, 30), end=otp.dt(2024, 2, 1, 16), timezone='America/New_York') Time VALUE 0 2024-02-01 10:29:59.997936089 220.5120 1 2024-02-01 11:29:59.858866634 218.5100 2 2024-02-01 12:29:59.718284221 217.2611 3 2024-02-01 13:29:59.705246762 218.1350 4 2024-02-01 14:29:59.530457056 218.1838 5 2024-02-01 15:29:59.918287654 217.1988 6 2024-02-01 15:59:59.990260269 216.9000
Get the difference in hourly total traded volume (sum of SIZE) between two symbols:
>>> msft = otp.DataSource('US_COMP_SAMPLE', tick_type='TRD', symbols='MSFT') >>> msft = msft.agg({'VOLUME': otp.agg.sum('SIZE')}, bucket_interval=otp.Hour(1)) >>> aapl = otp.DataSource('US_COMP_SAMPLE', tick_type='TRD', symbols='AAPL') >>> aapl = aapl.agg({'VOLUME': otp.agg.sum('SIZE')}, bucket_interval=otp.Hour(1)) >>> data = msft.ts_subtract(aapl, bucket_interval=otp.Hour(1), keep_zero_duration_ticks=True, ... input_field1_name='VOLUME', input_field2_name='VOLUME', output_field_name='VOLUME_DIFF') >>> otp.run(data, start=otp.dt(2024, 2, 1, 9, 30), end=otp.dt(2024, 2, 1, 16), timezone='America/New_York') Time VOLUME_DIFF 0 2024-02-01 10:30:00 -1381839.0 1 2024-02-01 11:30:00 -1915864.0 2 2024-02-01 12:30:00 -2303645.0 3 2024-02-01 13:30:00 -2140783.0 4 2024-02-01 14:30:00 -2811234.0 5 2024-02-01 15:30:00 -3847929.0 6 2024-02-01 16:00:00 -4147889.0
See also
TS_SUBTRACT OneTick event processor