otp.ts_add#

ts_add(sources, input_field_name=None, /, *, bucket_interval=0, bucket_units=None, bucket_time='end', bucket_end_condition=None, boundary_tick_bucket='new', running=False, symbols=None)#

Computes the sum of fields’ latest values across multiple series.

Outputs a time series of ticks with the summed field VALUE and the field named NUM_SYMBOLS containing the number of values that went into computing the sum.

Parameters:
  • sources (Source or list of Source) – One or more aggregated sources.

  • input_field_name (str) – The name of the input field to sum. Default is ‘PRICE’.

  • symbols (str, list of str, Source, pandas.DataFrame) – Symbol name or list of symbol names or the first-stage query representing the symbols used to sum the value across.

  • bucket_interval (int or float or Operation or OnetickParameter or symbol parameter or datetime offset object, default=0) –

    Determines the length of each bucket (units depends on bucket_units).

    If Operation of bool type is passed, acts as bucket_end_condition.

    Bucket interval can also be set as a float value if bucket_units is set to seconds. Note that values less than 0.001 (1 millisecond) are not supported.

    Bucket interval can be set via some of the datetime offset objects: otp.Milli, otp.Second, otp.Minute, otp.Hour, otp.Day, otp.Month. In this case you could omit setting bucket_units parameter.

    Bucket interval can also be set with integer OnetickParameter or symbol parameter.

  • bucket_units (Optional[Literal['seconds', 'ticks', 'days', 'months', 'flexible']], default=None) –

    Set bucket interval units.

    By default, if bucket_units and bucket_end_condition not specified, set to seconds. If bucket_end_condition specified, then bucket_units set to flexible.

    If set to flexible then bucket_end_condition must be set.

    Note that seconds bucket unit doesn’t take into account daylight-saving time of the timezone, so you may not get expected results when using, for example, 24 * 60 * 60 seconds as bucket interval. In such case use days bucket unit instead. See example in onetick.py.agg.sum().

  • bucket_time (Literal['start', 'end'], default=end) –

    Control output timestamp.

    • start

      the timestamp assigned to the bucket is the start time of the bucket.

    • end

      the timestamp assigned to the bucket is the end time of the bucket.

  • bucket_end_condition (condition, default=None) –

    An expression that is evaluated on every tick. If it evaluates to “True”, then a new bucket is created. This parameter is only used if bucket_units is set to “flexible”.

    Also can be set via bucket_interval parameter by passing Operation object.

  • boundary_tick_bucket (Literal['new', 'previous'], default=new) –

    Controls boundary tick ownership.

    • previous

      A tick on which bucket_end_condition evaluates to “true” belongs to the bucket being closed.

    • new

      tick belongs to the new bucket.

    This parameter is only used if bucket_units is set to “flexible”

  • running (bool, default=False) –

    See Aggregation buckets guide to see examples of how this parameter works.

    Specifies if the aggregation will be calculated as a sliding window. running and bucket_interval parameters determines when new buckets are created.

    • running = True

      aggregation will be calculated in a sliding window.

      • bucket_interval = N (N > 0)

        Window size will be N. Output tick will be generated when tick “enter” window (arrival event) and when “exit” window (exit event)

      • bucket_interval = 0

        Left boundary of window will be set to query start time. For each tick aggregation will be calculated in the interval [start_time; tick_t] from query start time to the tick’s timestamp (inclusive).

    • running = False (default)

      buckets partition the [query start time, query end time) interval into non-overlapping intervals of size bucket_interval (with the last interval possibly of a smaller size). If bucket_interval is set to 0 a single bucket for the entire interval is created.

      Note that in non-running mode OneTick unconditionally divides the whole time interval into specified number of buckets. It means that you will always get this specified number of ticks in the result, even if you have less ticks in the input data.

    Default: False

Examples

Get the sum of latest hourly SIZE values from two sources:

>>> aapl = otp.DataSource('US_COMP_SAMPLE', tick_type='TRD', symbols='AAPL')
>>> msft = otp.DataSource('US_COMP_SAMPLE', tick_type='TRD', symbols='MSFT')
>>> data = otp.ts_add([aapl, msft], 'SIZE', bucket_interval=otp.Hour(1))
>>> otp.run(data, start=otp.dt(2024, 2, 1, 9, 30), end=otp.dt(2024, 2, 1, 16), timezone='America/New_York')
                 Time  VALUE  NUM_SYMBOLS
0 2024-02-01 10:30:00  124.0            2
1 2024-02-01 11:30:00    6.0            2
2 2024-02-01 12:30:00   52.0            2
3 2024-02-01 13:30:00   51.0            2
4 2024-02-01 14:30:00   31.0            2
5 2024-02-01 15:30:00    6.0            2
6 2024-02-01 16:00:00   14.0            2

Get the sum of latest hourly SIZE values from three symbols:

>>> data = otp.DataSource('US_COMP_SAMPLE', tick_type='TRD')
>>> data = otp.ts_add(data, 'SIZE', bucket_interval=otp.Hour(1), symbols=['AAPL', 'MSFT', 'NVDA'])
>>> otp.run(data, start=otp.dt(2024, 2, 1, 9, 30), end=otp.dt(2024, 2, 1, 16), timezone='America/New_York')
                 Time  VALUE  NUM_SYMBOLS
0 2024-02-01 10:30:00  125.0            3
1 2024-02-01 11:30:00   13.0            3
2 2024-02-01 12:30:00   53.0            3
3 2024-02-01 13:30:00   61.0            3
4 2024-02-01 14:30:00   32.0            3
5 2024-02-01 15:30:00    8.0            3
6 2024-02-01 16:00:00   78.0            3

Use this together with other aggregations to aggregate across symbols. For example, hourly total traded volume (sum of SIZE) across symbols starting with A:

>>> data = otp.DataSource('US_COMP_SAMPLE', tick_type='TRD')
>>> data = data.agg({'VOLUME': otp.agg.sum('SIZE')}, bucket_interval=otp.Hour(1))
>>> symbols = otp.Symbols('US_COMP_SAMPLE', for_tick_type='TRD', pattern='A%')
>>> data = otp.ts_add(data, 'VOLUME', bucket_interval=otp.Hour(1), symbols=symbols)
>>> otp.run(data, start=otp.dt(2024, 2, 1, 9, 30), end=otp.dt(2024, 2, 1, 16), timezone='America/New_York')
                 Time       VALUE  NUM_SYMBOLS
0 2024-02-01 10:30:00  74155047.0           50
1 2024-02-01 11:30:00  43958426.0           50
2 2024-02-01 12:30:00  36254186.0           50
3 2024-02-01 13:30:00  39337805.0           50
4 2024-02-01 14:30:00  38059030.0           50
5 2024-02-01 15:30:00  41425091.0           50
6 2024-02-01 16:00:00  46796480.0           50

See also

TS_ADD OneTick event processor